Flooring Contractor in Walnut Creek, CA - Garage and Shop Floors Built on Sound Prep
Pittsburg Epoxy Floors and Concrete is a flooring contractor based in Pittsburg that coats, polishes and repairs concrete floors in Walnut Creek homes, garages, shops and businesses, and fixes the slab problems that make coatings peel.
Walnut Creek homes and the floors we see
Most of my calls in Walnut Creek come from the older ranch-style neighborhoods, where the attached garage has been a parking spot, a workshop and a storage room over the years. We also hear from townhome and condo owners who want a finished garage or entry, and from shop and office owners who need a floor that stands up to carts and steady foot traffic.
It's the same work we do next door in Concord and Pleasant Hill and out east in Brentwood. What shapes the job here is the age of the houses, because an older slab has had more years to soak up oil, crack and collect coatings that all have to be dealt with before anything new goes down.
Walnut Creek slabs and what they need first
The price here turns on the floor's size, the system you pick and how much grinding, patching and old coating removal the slab needs, and the schedule turns on that prep and the cure time.
Oil and old sealer soak deep into garage slabs, so we grind down to clean concrete because a coating can't grip a contaminated surface.
Hairline cracks and chipped joints are common on slabs this age, and we fill them first so they don't show through the new floor.
An old roll-on coating that's lifting has to come off completely, because a new floor holds no better than what's under it.
Pool decks and patios get wet and walked on barefoot, so we finish them with a texture that grips instead of a slick gloss.
I'd rather see your floor in person than guess at it, so I come out, take readings where they're needed and give you a written estimate.
Where we work around Walnut Creek
We're based in Pittsburg and work in Walnut Creek and many cities around it, including Concord and Pleasant Hill. If you don't see your city in the list below, call and ask.
Floor services we offer in Walnut Creek
Epoxy Floor Coatings
A good fit for a Walnut Creek garage, laundry or workshop slab that's sound but stained, giving you a sealed floor that wipes clean after we grind it.
Commercial & Industrial Epoxy Floor Coatings
For shops, warehouses and back rooms where carts, forklifts or steady traffic wear through paint, we lay a thicker system built for that load.
Garage Floor Coatings
Attached garages on older homes here usually need crack repair and a full grind first, then we coat them in flake or solid color that handles hot tires.
Polyaspartic Floor Coatings
If you need the garage back fast, polyaspartic cures quicker than standard epoxy and holds its color in sunlight coming through an open door.
Metallic Epoxy Flooring
For a showroom or studio where the floor is the look, metallic epoxy swirls color across the slab and shows any dip, so we level it first.
Urethane Cement Flooring
Restaurant kitchens and food prep rooms with hot water, grease and daily washdowns usually do better with urethane cement, because ordinary epoxy can soften under that heat.
Polished Concrete Flooring
If your slab is in decent shape, we grind and polish the concrete itself into a hard, glossy floor with nothing on top that can peel.
Stained Concrete Flooring
Stain soaks into concrete for a mottled color on entries and finished rooms, but it won't hide old patches, so I'll tell you if yours will show.
Terrazzo Flooring
For a lobby or entry that sees years of foot traffic, poured terrazzo sets glass or stone chips into a resin binder that we grind smooth and seal.
Basement Flooring
Basements and below-grade rooms are where damp slabs show up most, so we test the concrete for moisture before choosing a coating that can live with it.
Concrete Grinding & Surface Preparation
A lot of coatings we're called to redo here failed because nobody ground the slab, so we grind it open first and the new coat has something to grip.
Concrete Sealing
A penetrating or film sealer protects a driveway, patio or bare garage slab from oil and water when a full coating is more than you need.
Concrete Resurfacing & Overlays
When an older patio, walkway or garage floor is pitted or scaled but still solid underneath, a thin overlay gives you a new surface without tearing it out.
Self-Leveling Concrete & Overlays
Uneven slabs in older rooms, or a floor going under tile, vinyl or metallic epoxy, get a self-leveling pour that flows flat before the finish goes down.
Pool Deck Coatings & Resurfacing
Backyard pool decks with cracks, worn paint or a slippery finish can be resurfaced with a textured coating that's easier on bare feet and grips when wet.
Concrete Floor Stripping & Removal
When old epoxy, paint or tile glue is lifting, we strip it down to bare concrete, because a new floor laid over a failing one goes with it.
Get a free on-site floor estimate in Walnut Creek
We reply to every call and message within one business day, and there's no pressure and no obligation. I come out to your Walnut Creek property myself, look at the floor, take readings where they're needed and give you a written estimate.
- Call
- (925) 318-8041
- Hours
- Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM
Reasons to hire us for your Walnut Creek floor
I sold floor coatings before I installed them, and I kept hearing why floors failed. That's shaped how we've worked since I started this business in Pittsburg in 2017.
I'm on site for the prep
I come out to look at your floor and give the estimate myself, and I'm on the job for the grinding and repair, because that's where most floors go right or wrong. I check in through the rest.
Straight answers about your slab
Years in sales taught me what a pitch sounds like. If your floor can't handle the coating you have in mind, I'll tell you and point you to one it can, even when it costs less.
Licensed, insured, our own installers
We're licensed and fully insured, and our own installers do the work instead of a crew hired for the day. Every job is backed by our satisfaction guarantee.
Walnut Creek floor questions we hear
How much does an epoxy garage floor cost in Walnut Creek?
Your number comes from the written estimate I give after seeing the floor, because the slab decides most of it. Deep oil stains, lots of cracks or an old coating to strip all add prep and raise the price, while a clean, sound slab keeps it down. A basic solid-color epoxy usually costs less than a full flake system, a polyaspartic topcoat or a metallic finish.
Do I need a permit for an epoxy floor in Walnut Creek?
It can depend on the job, and the city's list doesn't settle it for floor coatings, so we check with the Community Development Department for your address before work starts. The city requires a building permit when you add a structure or physically change your property, and a kitchen or bathroom remodel is on its list, so a floor that's part of one falls under that remodel. If your job needs a permit, we pull it and handle the paperwork.
How do I apply for a building permit in Walnut Creek?
You apply online through the city's permit portal, because the city no longer accepts paper or emailed applications. Before the permit is issued, it has to be signed by the legal property owner or a California licensed contractor.
Can flooring work be done on a Saturday in Walnut Creek?
Construction on a Saturday or a City holiday needs an after-hours permit from the city, and none is allowed on national holidays such as Independence Day, Thanksgiving, Christmas and New Year's. We plan the grinding and coating days around those rules when we set your schedule.
Do I need a permit to resurface my patio or driveway in Walnut Creek?
The city says concrete flatwork on private property, such as a patio, a replaced driveway or a path, needs no permit, but replacing the driveway approach or the sidewalk in front of your house takes an Encroachment Permit. Resurfacing isn't spelled out the same way, so we confirm with the city for your address before we start.
How do I know if my concrete is too damp for an epoxy floor?
You usually can't tell by looking, which is why I take moisture readings on site wherever the floor shows dark patches, white powder or a musty smell. A slab pushing moisture up can lift a coating from below, so if yours reads high we'll talk about a system that tolerates it, or a sealed or polished floor instead.
Tell us about your Walnut Creek floor
Call (925) 318-8041 or use our contact form to describe your floor and ask about permits, and since we answer until 11 PM on weekdays and 10 PM on weekends, you can reach us after work.
Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM